Call us Now:   1-800-955-1996   |   Customer service hours:   Monday - Friday 8am to 4:30pm (Mountain)

The SurfaceScan has two primary applications:  It can be used to detect temperatures on the pavement to determine where frost or black ice may form if precipitation occurs.  It can also be used to determine if conditions are appropriate for applying traffic paint or other coatings.

  • Obtain accurate readings with no calibration required
  • Display instant temperature measurement and a historical graph of past measurements
  • Easy setup
  • Alarm features notify drivers when temperatures cross a given threshold
  • Bluetooth enabled
  • Compatible with Android 7.0+

Surface Sensor

The surface temperature is collected through non-contact IR Temperature sensor. This sensor is enclosed in a weatherproof IP63 class stainless steel housing, which is mounted in a Markroblend® EL703 Polycarbonate plastic housing.

Air Temperature/ Relative Humidity Sensor

Air Temperature and Relative Humidity is collected by a single sensor housed in a weatherproof plastic housing that utilizes a sintered metal air filter to protect the sensors.

Bluetooth Interface SSBI-1

The SSBI-1 module is enclosed in a 3.5” X 6” plastic housing.

Four LEDs provide information to the user:

  • Green LED shows that the SSBI-1 is on.
  • Red LED flashes to provide a heartbeat indication that the SSBI-1 is working properly.
  • Blue LED provides an indication that the Bluetooth connection can be discovered.
  • Yellow LED flashes when data is being transferred.

There are three connections to the SSBI-1. Two Ethernet connections and a power connection. The Surface sensor and AT/RH sensors connect to the SSBI-1 using labeled Ethernet connectors, while the power connector utilizes a twist-on two pin connector.

Display

The SS display module comes with a dash mountable, adjustable, holding fixture which includes instructions showing how it can be used to mount the display to the dash surface. Before permanently fixing the mount onto the dash, MHC recommends that you make sure the display can establish good communications with the SSBI-1 in the proposed mounting location. If the display is not able to communicate to the SSBI-1, you will need to try various locations until good communications can be established.

The SS display module comes preloaded with the MHC Surface Scan application software and has already been paired with the SSBI-1, and is therefore ready to go out of the box without any special configuration. Once the SSBI-1 has been powered up, the SS app can be launched and data readings should begin.

Warehouse

Regional Warehouse

We operate in 5 regional warehouses to provide you a fast and reliable delivery service

Delivery Truck

Fast Shipping

From highway signing and safety products to crash cushions and traffic monitoring equipment.

Experienced Staff

Experienced Staff

If you need assistance, a member of our friendly staff will be always happy to help you.